How To Make A Disc Wheel Tutorial ?✅

Technik günstig einkaufen

HIER klicken

How to disc make for bike Zipp Disc with Aero Disc Cover Installation and All things to buy
✘Alle Sachen zu kaufen✘
►3D Carbon Folie-


Videobeschreibung enthält Werbelinks!
Wer mich unterstützen möchte kann hierüber bei Amazon einkaufen und es kostet Ihn keinen Cent mehr. Danke!

★Subscribe☢ ☢
►Instagram –
►Facebook –
►World of Nerds –


▼مواصافات الجهاز▼

►PC Housing: Corsair CC-9011063-WW –
►Mainboard: MSI Sli Plus X99A USB 3.1 –
►CPU: Intel Core i7-6800K –
►Monitor: ASUS VX279Q FULL HD (27 Zoll) –
►Monitor: AOC G2460VQ6 FULL HD (24 Zoll) –
►Grafikkarte: Asus GeForce GTX 1080 ROG Strix Gaming –
►RAM: Vengeance LPX 16GB (4x4GB) DDR4 3000Mhz –
►SSD: Samsung 950 Pro 256GB interne SSD (M.2 mit NVMe, PCI Express 3.0 –
►SSD: 2 Samsung MZ-75E500B/EU 850 EVO interne SSD 500GB –
►Radiator: LEPA LPWAC240-HF WAK Aquachanger (240mm) Radiator –
►POWER: be quiet! DARK POWER PRO 11 – Netzteile –
►Tastatur: Sharkoon Skiller Pro Plus beleuchtete Gaming Tastatur –
►Maus: ECHTPower Gaming Maus 9200dpi –
►Webcam: Logitech C930 HD-Webcam (1080p) –
►Mikrofon: Auna MIC-900B USB Kondensator Mikrofon für Studio-Recording –
►Headset: HyperX hx-hscx-sr cloudx Pro Gaming –
►PS4: Konsole 500GB –
►PS4 VR:
►Elgato: Game Capture HD60 S –
►Control: Razer Raiju Gaming Controller –

►Laptop: Apple MacBook Pro (13,3 Zoll)Intel Core i5 5257U, 2,7GHz, 8GB RAM, 128GB SSD –
►Camara: Canon EOS 600D SLR-Digitalkamera –
►Objektiv: Canon EF 50mm 1:1.8 STM Objektiv –

♛ Join The Team: ♛
★Subscribe☢ ☢

How To Make A Disc Wheel Tutorial 🚴✅

38 Kommentare

    1. When he filled with foam, do you see the little hole for the valve? After that he installed the „platte“ and the foil. Cutted out, and covered the little hole after the tyre filling. So simple for a cyclist.

  1. What do u mean by how to make?Bike on a rack and riding the finished one . it does not show how the black covers are made

    1. +Oolong Johnson
      maybe it is to do with your wheels type but I am talking cheap MTB wheels here (beretta/malvestiti) or maybe how you tighten your spokes when you first set your wheels. I use a bit of copper grease on nipples and where they sit and then over tighten half a turn then back off half a turn to set it. Anyway I wouldn’t do this as it is just extra work but the wheel would offer less resistance to air, that’s common knowledge. Corrugated plastic would be easier, maybe not as slick looking. also, removing this would take 2 minutes so no big deal, it is the mess required in making it. that would put me off but I bet you can sell the bike way quicker and make money with this idea.

    2. you guys do realize, that you can adjust the nipples from the outside of the wheel, right? that’s why theyr heads have slots like a screw. just take off the tire and rim tape. *headshakes*

    3. +Cuda FX  So you take off the tyre and rim tape and adjust the spokes with a screwdriver right? Except that you can’t check the tension of the spokes in any way, or tell whether your pulling the rim in or out of true since you can’t tell which way the spokes are laced.

Kommentar hinterlassen

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.